Production of glass by type in Russia
Over five years of industrial output, sheet glass production volumes varied by processing method. The list includes cast, rolled, drawn, or blown glass, as well as thermally polished and bent, cut, or engraved glass. The rows allow for comparison of output by different production technologies from 2020 to 2024. Measurements are in millions of square meters of total area
Chart of glass production by type, 2020–2024, millions of square meters
- Sheet glass, cast, rolled, drawn or blown, but not further worked
- Flat glass thermally polished and flat glass with matte or polished surface, but not treated by other methods
- Flat glass bent, faceted, engraved, drilled, enamelled or otherwise treated, but not set in a frame or mount
- Tempered safety glass for construction
- Safety multilayer glass
See also
- Electricity consumption in Russia by year long time series by year
Set in numbers
5 series are published here, from 2020 to 2024, 5 reporting periods. 25 values in total.
“Sheet glass, cast, rolled, drawn or blown, but not further worked” fell by a factor of 3.7 between 2020 and 2024: from 101 to 27.1.
All table numbers are series: 5
| Series | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|
| Стекло листовое литое, прокатное, тянутое или выдувное, но не обработанное другим способом | 101,00 | 85,90 | 36,10 | 37,60 | 27,10 |
| Стекло листовое термически полированное и стекло листовое с матовой или полированной поверхностью, но не обработанное другим способом | 119,00 | 156,00 | 165,00 | 160,00 | 164,00 |
| Стекло листовое гнутое, граненое, гравированное, сверленое, эмалированное или обработанное иным способом, но не вставленное в раму или оправу | 7,30 | 9,80 | 15,00 | 16,30 | 23,40 |
| Стекло безопасное закаленное для строительства | 5,50 | 6,20 | 4,50 | 3,70 | 5,10 |
| Стекло безопасное многослойное | 5,10 | 7,20 | 5,20 | 5,70 | 6,10 |
How to read this table
Different row types reflect the specifics of sheet processing: from simple casting and rolling to complex thermal polishing or engraving. Comparing indicators shows which specific types of sheet glass are most in demand in industry and how the production structure changed over the specified period. Each category is listed separately to facilitate tracking the dynamics of a specific technological process
What is visible in these numbers
The largest value belongs to “Flat glass thermally polished and flat glass with matte or polished surface, but not treated by other methods” — 164; the smallest is “Tempered safety glass for construction” at 5.1. The gap between them is 32.2-fold.
More in the section Industrial production»
Period and application
The statistics cover the period from 2020 to 2024 and are presented on an annual basis. The information is relevant for analyzing the state of the glass industry and forecasting demand for industrial raw materials. Rosstat data is suitable for assessing enterprise production capacities and monitoring production volumes nationwide
Did you notice an error in this table? The parser is wrong, and most often one correction fixes many pages
Report an error Typo is easier this way: highlight it and press Ctrl + Enter